CAPACITIVE SWITCHES

The capacitive switches allow the key presses for the simple approach of the finger, without physically pressing.

They also allow placement after several materials, with unthinkable thicknesses in conventional switches.

As in the rest of the switches, the front panels can be screen printed both conventional and digital screen printing.

In addition to the materials used in other membrane switches: polyesters, polycarbonates… here we can also work directly on methacrylate.

It is possible to make relief keys or other items, Braille texts, transparent windows, transparent coloured areas, …

They may have the circuit board by screen printing on a sheet of polyester or printed circuit can be used with the possibility of adding SMD components and screws.

We can also place fixing adhesives in the back (or front) side, of various thicknesses.

Can be delivered on a support fiberglass, plastic, …

We work with high quality materials. You can check their characteristics:

HARD COATED   CADILLAC PLASTIC

MEMCON

Featured products

Loading…
  • RTJ GASKETS – TG30-TG31

    RTJ joints are indicated in applications high pressures and temperatures. They are designed to be accommodated in specific slots and flanges contact surfaces of the gasket and the flange must be carefully machined and finished. They are particularly suitable for very high pressures, up to 1000 psi. The RTJ gasket material should be a little softer than the flange itself […]

  • PTFE TUBES

    PTFE extruded tubing is manufactured by high pressure PTFE dispense resin mixed with additive, it is extruded and sintered. According to different demands, the tubing could be opaque or translucent. PTFE TUBE is suitable for contact with food, according to the FDA CFR 21.177.1550 KEY PROPERTIES • High and Low Temperature Resistance: continuous operating temperature 70℃~+260℃. • […]

  • PTFE ROD/PIPES CPI-PTFED

    Molded rod produced by compression moulding into pure rod and filled rod (color,copper powder, glass fiber, graphite, carbon fiber,carbon powder,polyphenylene,etc) Extruded rod produced by plunger extrusion processing of suspension teflon resin into pure rods,graphite rods and glass fiber rods. Pasted rod produced by paste push processing of dispersion polymerization teflon resin. CPI-PTFED, PTFE ROD/PIPES are suitable for contact […]

  • Die cutting

    We obtain stamped parts with clean cuts and very tight dimensional tolerances. All thanks to the perfect combination of the variety of processes available: – die-cutting – pressing – cut by blade     Possibility of manufacturing large, medium and small series. The most diverse shapes can be die-cut thanks to the versatility of our […]

  • CPI-PTFE ST

    CPI-PTFE ST stainless steel lined  gaskets consist of a perforated stainless steel insert uniformly enclosed by PTFE. The synergy between the highly corrosion resistant PTFE mantle and the perfectly centred rigid stainless steel insert give the gasket exceptional chemical and mechanical properties preventing cold-fl ow in a wide pressure-temperature range. In extreme applications they are […]

  • SOLAR PANELS

    Photovoltaic solar panels according to CPI quality standards manufactured in associated manufacturing plants, solar panels of different powers. As well as monocrystalline solar panels, polycrystalline solar panels or flexible solar panels. All our panels are manufactured under the design of our clients, offering high performance and proven durability. Types of solar panels: Monocrystalline and Polycrystalline […]