OIL SEALS CPI-TGOS

CPI-PRODYSOL is a recognized leadin manufcaturer and supplier of high quality and high performance oil seals, rotary shaft seals, and hydraulic and pneumatic seals. Our company’s reputation for excellence has been built on our ability to provide our valued customers with the most effective designing, engineering and manufacturing solutions to meet their most demanding applications. Our main objective is to continuosly exceed our customer’s expectations by providing them with high performance gaskets and sealing products, competitive pricing, on-time delivery and exceptional customer service.

 

CPI Sealing provides rotary oil seals and shaft seals in a variety of styles, sizes, and material to appropriately suit your application. Our selection of fluid sealing products are available in a comprehensive range of rubber polymers including Nitrile (NBR), Viton®, Fluorocarbon (FKM), Silicone (VMQ), Neoprene®, Chloroprene (CR), Ethylene Propylene (EPDM), pLYACRYLIC (acm), Styrene Butadiene Rubber (SBR), Fluorosilicone (FVMQ), Polyrethane (AU/EU), Hydrogenated Nitrile (HNBR), and Methyl Vinyl Silicone (MVQ).

All products are manufactured according to ASTM D2000 standards. CPI-PRODYSOL can supply custom oil and rotary shaft seals to your OEM drawings and specifications.

PROFILES

More comun styles:

  • Type TC dual Lip, Rubber coated with spring

Low pressure dual lip with garter spring privdes protection from contaminants. Rubber covered O.D. imroves sealing ability at the housing. Internal face of the steel case is not fully rubber covered.

  • Type SC Single lip, rubber coated with spring

Low pressure single lip with garter spring. Rubber covered O.D improves sealing ability at the housing. Internal face of the steeel case is not fully rubber covered.

  • Type KC dual lip, Rubber coated, no spring

Non-pressure dual lip without garter spring provides protection from contaminants. Rubber covered O.D. improves sealing ability at the housing. Internal face of the steel case is not fully rubber covered.

  • Type VC Single Lip, Rubber Coated, No Spring

Non-pressure single lip without garter spring.  Rubber covered O.D. improves sealing ability at the housing. Internal face of the steel case is not fully rubber covered.

  • Type TB Dual Lip, Metal Case with Spring

Low-pressure dual lip with garter spring provides protection from contaminants. Precision ground metal OD with a lead-in chamfer for ease of installation.  Stainless steel is available on special request.

  • Type SB Single Lip, Metal Case with Spring

Low-pressure single lip with garter spring.  Precision ground metal OD with a lead-in chamfer for ease of installation.  Stainless steel is available on special request.

  • Type KB Dual Lip, Metal Case, No Spring

Non-pressure dual lip without garter spring provides protection from contaminants. Precision ground metal OD with a lead-in chamfer for ease of installation.  Stainless steel is available on special request.

  • Type VB Single Lip, Metal Case, No Spring

Non-pressure single lip without garter spring.  Precision ground metal OD with a lead-in chamfer for ease of installation. Stainless steel is available on special request.

  • Type TA Dual Lip, Full Metal Case with Spring

Low-pressure dual lip with garter spring provides protection from contaminants.  Precision ground O.D. with the addition of an inner case that provides increased structural rigidity and durability. Stainless steel is available on special request.

  • Type SA Single Lip, Full Metal Case with Spring

Low-pressure single lip with garter spring.  Precision ground O.D. with the addition of an inner case that provides increased structural rigidity and durability.  Stainless steel is available on special request.

  • Type KA Dual Lip, Full Metal Case, No Spring

Non-pressure dual lip without garter spring provides protection from contaminants.  Precision ground O.D. with the addition of an inner case that provides increased structural rigidity and durability.  Stainless steel is available on special request.

  • Type VA Single Lip, Full Metal Case, No Spring

Non-pressure single lip without garter spring.  Precision ground O.D. with the addition of an inner case that provides increased structural rigidity and durability

 

END CAP SERIES & GAMMA RINGS  

End caps are designed for applications where the shaft does not pass through the housing wall of the bore.  The end cover provides protection for the bearings.  The covers are designed to fit into housing bores for rotary shaft seals.  They have the same tolerances as those for the O.D. of a seal. The inner housing is carbon steel and the outer seal is nitrile rubber.  Industries that typically use end covers are gearbox, automotive, agricultural equipment, exercise equipment, trucks, buses and trailers.

Custom Gasket’s custom oil seals and shaft seals are currently used in the following industries.

  • Gearboxes
  • Fuel Pumps
  • Augers Mixers & Dryers
  • Casters
  • Drilling Spindles
  • Electric Motors
  • Propeller Shafts
  • Transmissions
  • Compressors
  • Liquid Handling Swivel
  • Rolling Mill
  • Vacuum Pumps
  • gear box
  • Fuel Handling Flexible
  • Couplings
  • Geo-Rotors
  • Racing Engines
  • Hydrostatic
  • Joints
  • Agitators
  • Gear Pumps
  • Crank Shaft
  • Hydraulic Motors & Pumps
  • Wheel Hubs

Featured products

Loading…
  • SOLAR PANELS

    Photovoltaic solar panels according to CPI quality standards manufactured in associated manufacturing plants, solar panels of different powers. As well as monocrystalline solar panels, polycrystalline solar panels or flexible solar panels. All our panels are manufactured under the design of our clients, offering high performance and proven durability. Types of solar panels: Monocrystalline and Polycrystalline […]

  • Die cutting

    We obtain stamped parts with clean cuts and very tight dimensional tolerances. All thanks to the perfect combination of the variety of processes available: – die-cutting – pressing – cut by blade     Possibility of manufacturing large, medium and small series. The most diverse shapes can be die-cut thanks to the versatility of our […]

  • RTJ GASKETS – TG30-TG31

    RTJ joints are indicated in applications high pressures and temperatures. They are designed to be accommodated in specific slots and flanges contact surfaces of the gasket and the flange must be carefully machined and finished. They are particularly suitable for very high pressures, up to 1000 psi. The RTJ gasket material should be a little softer than the flange itself […]

  • FLANGE INSULATIONS KITS TGCD

    FLANGE INSULATIONS KITS • Flange insulation kits CPI-TGCD are typically used on offshore installations, seawater environments, chemical installations, oil refinery pipelines. • Flange insulation kits CPI-TGCD follow standards ANSI 16.5 & API 605, other standards need to provide more specifications according to our requirements. • Flange Insulation Kits CPI-TGCD consist of an insulating gasket; some insulating sleeves […]

  • PTFE TUBES

    PTFE extruded tubing is manufactured by high pressure PTFE dispense resin mixed with additive, it is extruded and sintered. According to different demands, the tubing could be opaque or translucent. PTFE TUBE is suitable for contact with food, according to the FDA CFR 21.177.1550 KEY PROPERTIES • High and Low Temperature Resistance: continuous operating temperature 70℃~+260℃. • […]

  • PTFE ROD/PIPES CPI-PTFED

    Molded rod produced by compression moulding into pure rod and filled rod (color,copper powder, glass fiber, graphite, carbon fiber,carbon powder,polyphenylene,etc) Extruded rod produced by plunger extrusion processing of suspension teflon resin into pure rods,graphite rods and glass fiber rods. Pasted rod produced by paste push processing of dispersion polymerization teflon resin. CPI-PTFED, PTFE ROD/PIPES are suitable for contact […]