PTFE TUBES

PTFE extruded tubing is manufactured by high pressure PTFE dispense resin mixed with additive, it is extruded and sintered. According to different demands, the tubing could be opaque or translucent.

PTFE TUBE is suitable for contact with food, according to the FDA CFR 21.177.1550

  • KEY PROPERTIES

• High and Low Temperature Resistance: continuous operating temperature 70℃~+260℃.
• Corrosion Resistance: chemically stable except fluorine gas, alkali metals dissolved.
• Weatherability: the best anti-aging plastic; Outdoor long-term use will not degrade.
• High Lubrication: the lowest coefficient of friction of any polymer.
• Non-adhesive: prevent the adhesion of almost all pollutants, water contact angle θ=110º.
• Non-toxic: doesn’t cause allergic reactions, compatible with human tissue and body fluids.
• Flame resistance: non-combustible in air (oxygen index> 95%).
• Electrical properties: excellent electrical insulation, broadband dielectric constant and loss factor minimum.

  • APLICATIONS

Mechanical Equipment
Aviation
Auto Parts
Chemical Tubes
Electronics
Cables
Medical Equipment
Etc…

  • SPECIFICATION 
ID (MM)Tolerance of ID
(mm)
Wall Thickness (mm)Wall Tolerance (mm)Length
(mm)
0.5, 0.6, 0.7, 0.8, 0.9, 1.0±0.050.2~0.5±0.05According to customer’s request
1.2, 1.4, 1.5, 1.6, 1.8±0.080.2~0.5±0.05
0.6~0.8±0.08
2, 2.2, 2.4, 2.5, 2.6, 2.8, 3.0, 3.2, 3.4, 3.5, 3.6, 3.8, 4.0±0.100.2~0.5±0.05
0.6~0.9±0.08
1.0~1.5±0.10
5, 6, 7, 8±0.100.5~0.9±0.08
1.0~1.5±0.10
1.5~2.0±0.12
9, 10, 11, 12, 13, 14, 15, 16, 17, 18, 19, 20, 25±0.10~±0.201.0~2.0±0.10~±0.15
≥25±0.251.5~2.0±0.20
RemarkWe can custom made the sizes and colors according to customer’s requirements.
  • PTFE-TEFLON PROPERTIES:
PropertiesUnitPTFE
 

Physical

Melting pointºC327-342
Densityg/cm32.16
 

 

Mechanical

Tensile StrengthMpa26-36
Ultimate Elongation%325
Impact resistance 23ºC-54ºCJ/M187, 107
Hardness, shoreshore-DD-55
Flex lifeMpa490
Flexural modulusCycles to failure885000>90×106
Coefficient of friction0.1
 

Thermal

Peak melting temp.ºC327
Limiting oxygene%>95
Heat of combustionMG/kg4.9-5.0
Continuous maximum service temp.ºC260
 

 

Electrical

Relative permittivity1 KHZ – 1 MHZ2.040
Dissipation factor@MHZ0.00010
ARC ResistanceS240-300
Volume resistiviyΩ .m>106
Surface resistiviyΩ>106
Data Sheet

Featured products

Loading…
  • PTFE ROD/PIPES CPI-PTFED

    Molded rod produced by compression moulding into pure rod and filled rod (color,copper powder, glass fiber, graphite, carbon fiber,carbon powder,polyphenylene,etc) Extruded rod produced by plunger extrusion processing of suspension teflon resin into pure rods,graphite rods and glass fiber rods. Pasted rod produced by paste push processing of dispersion polymerization teflon resin. CPI-PTFED, PTFE ROD/PIPES are suitable for contact […]

  • SOLAR PANELS

    Photovoltaic solar panels according to CPI quality standards manufactured in associated manufacturing plants, solar panels of different powers. As well as monocrystalline solar panels, polycrystalline solar panels or flexible solar panels. All our panels are manufactured under the design of our clients, offering high performance and proven durability. Types of solar panels: Monocrystalline and Polycrystalline […]

  • O-RINGS

    O-RINGS The use of O-rings extends to many fields. The main function that characterizes this type of joint is its ability to maintain the seal, preventing the mixture of liquids and gases. They are characterized by their versatility and resistance to high pressures and temperatures. The type of elastomer used in its manufacture can vary. We can offer […]

  • RTJ GASKETS – TG30-TG31

    RTJ joints are indicated in applications high pressures and temperatures. They are designed to be accommodated in specific slots and flanges contact surfaces of the gasket and the flange must be carefully machined and finished. They are particularly suitable for very high pressures, up to 1000 psi. The RTJ gasket material should be a little softer than the flange itself […]

  • Die cutting

    We obtain stamped parts with clean cuts and very tight dimensional tolerances. All thanks to the perfect combination of the variety of processes available: – die-cutting – pressing – cut by blade     Possibility of manufacturing large, medium and small series. The most diverse shapes can be die-cut thanks to the versatility of our […]

  • FLANGE INSULATIONS KITS TGCD

    FLANGE INSULATIONS KITS • Flange insulation kits CPI-TGCD are typically used on offshore installations, seawater environments, chemical installations, oil refinery pipelines. • Flange insulation kits CPI-TGCD follow standards ANSI 16.5 & API 605, other standards need to provide more specifications according to our requirements. • Flange Insulation Kits CPI-TGCD consist of an insulating gasket; some insulating sleeves […]