ROLLOS PTFE EXPANDIDO AUTOADHESIVO CPI-EPTFER

CPI-EPTFER  es una junta autoadhesiva  producida 100% en PTFE expandido puro.  Se ajusta a casi cualquier superficie de sellado. La cinta CPI-EP autoadhesivo hace la instalación rápida y fácil.

EPTFER, PTFE expandido autoadhesivo es apto para contactos con alimentos, conforme a la FDA CFR 21.177.1550

  • FICHA TÉCNICA
Material 100% PTFE Expandido
Densidad 0.70 g/cm3
Temperatura -200ºC hasta 260ºC
Presión 100 bar
pH 0-14
Compresibilidad 64% ~ 69%
Viscoelasticidad 38% ~ 40%
  • VENTAJAS

Instalación fácil y rápida.
 Químicamente inerte, resistente a la temperatura.
 Ideal para superficies grandes, complejas y dañadas.

  • APLICACIONES

 Para todos los tipos de bridas.
 Para carcasas de bombas, compresores, etc.
 Junta de tapa para diversos contenedores y recipientes.
 Junta idóneas para agujeros artificiales, sistemas de ventilación, intercambiadores de calor, etc.
 Para juntas sensibles al estrés donde sólo podrá aplicarse una carga baja de la brida.

  • MEDIDAS
Ancho Espesor Largo
mm mm m
3 1.5 50
5 2.5 25
7 2.5 20
10 3.0 10
12 4.0 8
14 5.0 6
17 6.0 5
20 7.0 5

* Posiblidad de fabricar medias especiales bajo pedido.

FICHA TÉCNICA

Featured products

Loading…
  • CPI-PTFE ST

    CPI-PTFE ST stainless steel lined  gaskets consist of a perforated stainless steel insert uniformly enclosed by PTFE. The synergy between the highly corrosion resistant PTFE mantle and the perfectly centred rigid stainless steel insert give the gasket exceptional chemical and mechanical properties preventing cold-fl ow in a wide pressure-temperature range. In extreme applications they are […]

  • PTFE ROD/PIPES CPI-PTFED

    Molded rod produced by compression moulding into pure rod and filled rod (color,copper powder, glass fiber, graphite, carbon fiber,carbon powder,polyphenylene,etc) Extruded rod produced by plunger extrusion processing of suspension teflon resin into pure rods,graphite rods and glass fiber rods. Pasted rod produced by paste push processing of dispersion polymerization teflon resin. CPI-PTFED, PTFE ROD/PIPES are suitable for contact […]

  • O-RINGS

    O-RINGS The use of O-rings extends to many fields. The main function that characterizes this type of joint is its ability to maintain the seal, preventing the mixture of liquids and gases. They are characterized by their versatility and resistance to high pressures and temperatures. The type of elastomer used in its manufacture can vary. We can offer […]

  • FLANGE INSULATIONS KITS TGCD

    FLANGE INSULATIONS KITS • Flange insulation kits CPI-TGCD are typically used on offshore installations, seawater environments, chemical installations, oil refinery pipelines. • Flange insulation kits CPI-TGCD follow standards ANSI 16.5 & API 605, other standards need to provide more specifications according to our requirements. • Flange Insulation Kits CPI-TGCD consist of an insulating gasket; some insulating sleeves […]

  • PTFE TUBES

    PTFE extruded tubing is manufactured by high pressure PTFE dispense resin mixed with additive, it is extruded and sintered. According to different demands, the tubing could be opaque or translucent. PTFE TUBE is suitable for contact with food, according to the FDA CFR 21.177.1550 KEY PROPERTIES • High and Low Temperature Resistance: continuous operating temperature 70℃~+260℃. • […]

  • RTJ GASKETS – TG30-TG31

    RTJ joints are indicated in applications high pressures and temperatures. They are designed to be accommodated in specific slots and flanges contact surfaces of the gasket and the flange must be carefully machined and finished. They are particularly suitable for very high pressures, up to 1000 psi. The RTJ gasket material should be a little softer than the flange itself […]