RUBBER-METAL GASKETS CPI-RM

Rubber-Metal Gaskets have amassed a wide range of applications in sealing technology. Wherever the secure sealing of media with an exceptionally low leak rate, as well as low bolt loads at relatively low temperatures is required, rubber-metal gaskets provide the optimal solution.

These are used in a range of sectors: steel works, pharmaceutical industries, food producers, petrochemical and chemical sectors and electricity stations and can be used where there is water and any type of gas.

Thanks to their special structure they can compensate for any irregularities and any inexact alignment of the flange also with minimum clamping thus, resulting in less wear and tear on the flange sealing surfaces.

  • FEATURES AND PROPERTIES

These are produced by means of a rubber vulcanization process, on a flat metal ring, obtained through a shearing process to guarantee suitable isolation of the ring and thus, impede separation when used in extreme conditions. The inner ring increases resistance to pressure and various types of metals can be used to produce it as well as different types of rubber for producing the vulcanized sheathing, in turn it can be produced in different sections.

  • ADVANTAGES

• Improved blow-out safety.
• Perfect sealing at lower bolt loads.
• Suitable for fragile components like plastic flanges.

CPI-RM

CPI-RMRCPI-RMO
CPI-RMY
CPI-RMYO

 

 

  • TECHNICAL DATA

Pressure: 25 bar.
• Temperature:

EPDM -30 ~ 120 degrees Celsius
NBR -25 ~ 70 degrees Celsius
FKM -20 ~ 200 degrees Celsius
DATA SHEET

 

Featured products

Loading…
  • PTFE TUBES

    PTFE extruded tubing is manufactured by high pressure PTFE dispense resin mixed with additive, it is extruded and sintered. According to different demands, the tubing could be opaque or translucent. PTFE TUBE is suitable for contact with food, according to the FDA CFR 21.177.1550 KEY PROPERTIES • High and Low Temperature Resistance: continuous operating temperature 70℃~+260℃. • […]

  • FLANGE INSULATIONS KITS TGCD

    FLANGE INSULATIONS KITS • Flange insulation kits CPI-TGCD are typically used on offshore installations, seawater environments, chemical installations, oil refinery pipelines. • Flange insulation kits CPI-TGCD follow standards ANSI 16.5 & API 605, other standards need to provide more specifications according to our requirements. • Flange Insulation Kits CPI-TGCD consist of an insulating gasket; some insulating sleeves […]

  • RTJ GASKETS – TG30-TG31

    RTJ joints are indicated in applications high pressures and temperatures. They are designed to be accommodated in specific slots and flanges contact surfaces of the gasket and the flange must be carefully machined and finished. They are particularly suitable for very high pressures, up to 1000 psi. The RTJ gasket material should be a little softer than the flange itself […]

  • CPI-PTFE ST

    CPI-PTFE ST stainless steel lined  gaskets consist of a perforated stainless steel insert uniformly enclosed by PTFE. The synergy between the highly corrosion resistant PTFE mantle and the perfectly centred rigid stainless steel insert give the gasket exceptional chemical and mechanical properties preventing cold-fl ow in a wide pressure-temperature range. In extreme applications they are […]

  • O-RINGS

    O-RINGS The use of O-rings extends to many fields. The main function that characterizes this type of joint is its ability to maintain the seal, preventing the mixture of liquids and gases. They are characterized by their versatility and resistance to high pressures and temperatures. The type of elastomer used in its manufacture can vary. We can offer […]

  • PTFE ROD/PIPES CPI-PTFED

    Molded rod produced by compression moulding into pure rod and filled rod (color,copper powder, glass fiber, graphite, carbon fiber,carbon powder,polyphenylene,etc) Extruded rod produced by plunger extrusion processing of suspension teflon resin into pure rods,graphite rods and glass fiber rods. Pasted rod produced by paste push processing of dispersion polymerization teflon resin. CPI-PTFED, PTFE ROD/PIPES are suitable for contact […]