Thanks to the high chemical stability, good mechanical properties and permanent resistance in the atmosphere. The gaskets are suitable for all types of gaskets and different media, mostly for aggressive chemicals. It can be used for a wide range of applications in such fields as fine chemical, petrochemicals, phanmaceuticals, foodstuffs and general industries.


Thanks to high stability of virgin PTFE, which is used for the envelope, exhibits extraondinary chemical resistance. Combinations of insert materials allow a large number of different applications.


Insert Material: CPI-FM, Rubber, Stainless Steel.
Envelope Material: Virgin PTFE


The PTFE envelope for gaskets with maximum external diameter of up to 500mm are made in one piece. For gaskets with greater diameters they are welded. Oval shapes of PTFE envelopes are welded. There are no limitations regarding sizes for gaskets with welded envelopes.

Machined PTFE-envelope, normally with only one insert. For uncritical applications with low temperature and low pressure. Insert at custmer’s option
This style is for demanding applications. No notch-effect at inner diameter. These PTFE-envelopes can be fitted with various inserts or insert combinations. Larger diameter are produced in welded construction
This style is for TG or MF flanges, enable to decrease liquid stagnation at flange bore part

Featured products


    PTFE extruded tubing is manufactured by high pressure PTFE dispense resin mixed with additive, it is extruded and sintered. According to different demands, the tubing could be opaque or translucent. PTFE TUBE is suitable for contact with food, according to the FDA CFR 21.177.1550 KEY PROPERTIES • High and Low Temperature Resistance: continuous operating temperature 70℃~+260℃. • […]


    FLANGE INSULATIONS KITS • Flange insulation kits CPI-TGCD are typically used on offshore installations, seawater environments, chemical installations, oil refinery pipelines. • Flange insulation kits CPI-TGCD follow standards ANSI 16.5 & API 605, other standards need to provide more specifications according to our requirements. • Flange Insulation Kits CPI-TGCD consist of an insulating gasket; some insulating sleeves […]


    O-RINGS The use of O-rings extends to many fields. The main function that characterizes this type of joint is its ability to maintain the seal, preventing the mixture of liquids and gases. They are characterized by their versatility and resistance to high pressures and temperatures. The type of elastomer used in its manufacture can vary. We can offer […]


    RTJ joints are indicated in applications high pressures and temperatures. They are designed to be accommodated in specific slots and flanges contact surfaces of the gasket and the flange must be carefully machined and finished. They are particularly suitable for very high pressures, up to 1000 psi. The RTJ gasket material should be a little softer than the flange itself […]


    CPI-PTFE ST stainless steel lined  gaskets consist of a perforated stainless steel insert uniformly enclosed by PTFE. The synergy between the highly corrosion resistant PTFE mantle and the perfectly centred rigid stainless steel insert give the gasket exceptional chemical and mechanical properties preventing cold-fl ow in a wide pressure-temperature range. In extreme applications they are […]


    Molded rod produced by compression moulding into pure rod and filled rod (color,copper powder, glass fiber, graphite, carbon fiber,carbon powder,polyphenylene,etc) Extruded rod produced by plunger extrusion processing of suspension teflon resin into pure rods,graphite rods and glass fiber rods. Pasted rod produced by paste push processing of dispersion polymerization teflon resin. CPI-PTFED, PTFE ROD/PIPES are suitable for contact […]