SHEETS PTFE – CPI-PTFEP

Molded sheet produced by compression molding processing, moulding, sintering, cooling of suspension PTFE resin into pure sheets and filled sheets (color,copper powder, glass fiber, graphite, carbon fiber, black, carbon powder,polyphenylene,anti-static plates,etc)

CPI-PTFEP, PTFE Sheets are suitable for contact with food, according to the FDA CFR 21.177.1550

  • FEATURES

Low temperature and high temperature resistant (-190 ℃- +250 ℃) 2.corrosion resistant, weather resistant 3.high lubricity, no adhesion 4.non-toxic, 5.non-flammable 6.acid and alkali resistant (except molten alkali metals) 7.antioxidant.

  • APPLICATIONS

Welded chemical containers, tanks, machinery, construction, transportation bridges slider, rail release material. The production of sealing materials.

Filling different materials to enhance performance of the desired area according to customer requirements.

  • SPECIFICATIONS SIZES AND THICKNESS
450×450 2-100 mm
500×500 2-100 mm
600×600 2-100 mm
800×800 2-100 mm
1000×1000 2-100 mm
1200×1200 2-100 mm
1500×1500 2-50 mm
1800×1200 2-50 mm
1800×1800  2-50 mm
2000×1000  2-50 mm
2000×2000  2-50 mm
DATA SHEET

Featured products

Loading…
  • FLANGE INSULATIONS KITS TGCD

    FLANGE INSULATIONS KITS • Flange insulation kits CPI-TGCD are typically used on offshore installations, seawater environments, chemical installations, oil refinery pipelines. • Flange insulation kits CPI-TGCD follow standards ANSI 16.5 & API 605, other standards need to provide more specifications according to our requirements. • Flange Insulation Kits CPI-TGCD consist of an insulating gasket; some insulating sleeves […]

  • PTFE ROD/PIPES CPI-PTFED

    Molded rod produced by compression moulding into pure rod and filled rod (color,copper powder, glass fiber, graphite, carbon fiber,carbon powder,polyphenylene,etc) Extruded rod produced by plunger extrusion processing of suspension teflon resin into pure rods,graphite rods and glass fiber rods. Pasted rod produced by paste push processing of dispersion polymerization teflon resin. CPI-PTFED, PTFE ROD/PIPES are suitable for contact […]

  • RTJ GASKETS – TG30-TG31

    RTJ joints are indicated in applications high pressures and temperatures. They are designed to be accommodated in specific slots and flanges contact surfaces of the gasket and the flange must be carefully machined and finished. They are particularly suitable for very high pressures, up to 1000 psi. The RTJ gasket material should be a little softer than the flange itself […]

  • O-RINGS

    O-RINGS The use of O-rings extends to many fields. The main function that characterizes this type of joint is its ability to maintain the seal, preventing the mixture of liquids and gases. They are characterized by their versatility and resistance to high pressures and temperatures. The type of elastomer used in its manufacture can vary. We can offer […]

  • PTFE TUBES

    PTFE extruded tubing is manufactured by high pressure PTFE dispense resin mixed with additive, it is extruded and sintered. According to different demands, the tubing could be opaque or translucent. PTFE TUBE is suitable for contact with food, according to the FDA CFR 21.177.1550 KEY PROPERTIES • High and Low Temperature Resistance: continuous operating temperature 70℃~+260℃. • […]

  • CPI-PTFE ST

    CPI-PTFE ST stainless steel lined  gaskets consist of a perforated stainless steel insert uniformly enclosed by PTFE. The synergy between the highly corrosion resistant PTFE mantle and the perfectly centred rigid stainless steel insert give the gasket exceptional chemical and mechanical properties preventing cold-fl ow in a wide pressure-temperature range. In extreme applications they are […]