NON METALIC SHEETS

We can supply all materials that we use to manufacture the gaskets; sheets of compressed cardboards free of asbestos, PTFE sheets in its different forms, graphite sheets, rubber sheets, etc…

 

 

Featured products

Loading…
  • PTFE ROD/PIPES CPI-PTFED

    Molded rod produced by compression moulding into pure rod and filled rod (color,copper powder, glass fiber, graphite, carbon fiber,carbon powder,polyphenylene,etc) Extruded rod produced by plunger extrusion processing of suspension teflon resin into pure rods,graphite rods and glass fiber rods. Pasted rod produced by paste push processing of dispersion polymerization teflon resin. CPI-PTFED, PTFE ROD/PIPES are suitable for contact […]

  • PTFE TUBES

    PTFE extruded tubing is manufactured by high pressure PTFE dispense resin mixed with additive, it is extruded and sintered. According to different demands, the tubing could be opaque or translucent. PTFE TUBE is suitable for contact with food, according to the FDA CFR 21.177.1550 KEY PROPERTIES • High and Low Temperature Resistance: continuous operating temperature 70℃~+260℃. • […]

  • RTJ GASKETS – TG30-TG31

    RTJ joints are indicated in applications high pressures and temperatures. They are designed to be accommodated in specific slots and flanges contact surfaces of the gasket and the flange must be carefully machined and finished. They are particularly suitable for very high pressures, up to 1000 psi. The RTJ gasket material should be a little softer than the flange itself […]

  • SOLAR PANELS

    Photovoltaic solar panels according to CPI quality standards manufactured in associated manufacturing plants, solar panels of different powers. As well as monocrystalline solar panels, polycrystalline solar panels or flexible solar panels. All our panels are manufactured under the design of our clients, offering high performance and proven durability. Types of solar panels: Monocrystalline and Polycrystalline […]

  • O-RINGS

    O-RINGS The use of O-rings extends to many fields. The main function that characterizes this type of joint is its ability to maintain the seal, preventing the mixture of liquids and gases. They are characterized by their versatility and resistance to high pressures and temperatures. The type of elastomer used in its manufacture can vary. We can offer […]

  • Die cutting

    We obtain stamped parts with clean cuts and very tight dimensional tolerances. All thanks to the perfect combination of the variety of processes available: – die-cutting – pressing – cut by blade     Possibility of manufacturing large, medium and small series. The most diverse shapes can be die-cut thanks to the versatility of our […]