What is it and why is called sealing gasket?
It is called sealing gasket a piece of compliant material used to seal two sides and are used generically element in any hydraulic or pneumatic handling or any other fluid, solid or gas. A sealing gasket may also be known as packing or mechanical gasket.
The material of a sealing gasket can be varied depending on its use. We can find gaskets of rubber, silicone, metal, etc.
The sealing gaskets solve sealing problems that may occur in different applications: motors, equipment, transfer of fluids such as water, air, gas, lubricants and oils, fuels, steam, chemicals.
They are also used to seal the devices used in fluid transport pumps, valves and flanges.
The sealing gaskets prevent possible environment leaks preserving and providing security to industrial processes.
We can find industrial gaskets in countless of locking systems, equipment’s and appliances, such as flanged joints in pipes, hatches and gates, valves, pumps, mixers and blenders, electronic equipment, appliances, lights, autoclaves, ovens.
CPI-PRODYSOL is a leader in the development and manufacturing of sealing gaskets. sportfogadás újság
How many types of sealing gasket are used in the market?
Depending on the conditions and required sealing, each process requires a gasket sealing material concrete with different properties either by the type of fluid contact (Alkaline, oxidizing, viscous, acid etc.), temperature, pressure or vacuum and linear velocity of the point to be sealed if it is to make a dynamic seal.
The most usual sealing gaskets are O-rings, Gaskets, oil seals, seals for pneumatic and Hydraulic, braided packing, double metal jacketed gaskets, spiral wound gaskets, metal gaskets (RTJ, grooved gaskets) and flange insulating kits.
It is also habitual the sealing gasket manufacturing in different technical plastics:
PTFE,PEEK,POM,PCPTFE.
CPI Sealing has available between their sealing products the products manufacturing of rubber and engineering plastics low level, either by machining process, extrusion, vulcanization or injection.
The manufacturing of rubber or plastic pieces without using moulds is one of the latest technologies acquired by our company in constant search of new technologies for the benefit of our customers. This process is very suitable for the realization of small series and samples.
Which sectors are mainly focused our sealing gaskets? gaminator 777: ingyen nyerőgépek, kaszinó, játékok
We found plenty of uses for sealing gaskets : closure systems, equipment and appliances, such as in flanged joints of pipes, hatches and gates, valves, pumps, mixers and blenders, electronic equipment, appliances, lights, autoclaves, ovens, etc.
CPI SEALIING covers a wide range of products for sealing, being present in such diverse sectors as the petrochemical, chemical, nuclear, thermal and hydroelectric power plants, boilers, air conditioning, motors, pharmaceuticals, naval, lighting, optics, feeding, watering, automotive and machinery manufacturing.
The constant demands on sealing by our customers, as well as research R & D allow us to increase participation in new sectors: solar thermal energy, 3D printing, LED lighting, or water treatment for the food industry are some of the latest contributions in sealing technology where CPI has made its contribution.
Research into new sealing materials and the constant evolution of new solutions and sealing products require CPI SEALING to the acquisition of technologies and machinery to satisfy market demands.
Is exist different types of sealing?
Generically there are two types of sealing: dynamic and static.
It is called static sealing one in which the sealing element is not subjected to any friction or movement with respect to another part of equipment or machine. However, often also it called static sealing which perform on a shaft, a rod or any part of a rotating team or reciprocating movement whose speed does not exceed 2 mt / sec.
The dynamic sealing is being performed on a shaft, rod or moving part either reciprocating or rotary it but with a speed equal to or upper than 2 m / sec.
We understand that executes a reciprocating body along its own axis, also called axial movement. One example is performing a piston movement either pneumatic or hydraulic along the cylinder. online bukméker We define rotational movement as one that makes a body around its own axis.
The static sealing: occurs between surfaces without relative movement between them and dynamic sealing: occurs between surfaces having a relative movement of one with respect the other one.
CPI-PRODYSOL is a leader in the development and manufacture of gaskets.
Recent Comments